Xstamper F11 Pre-Inked Custom Triangle Inspection Stamp - Impression Dimensions: 1/2" Diameter
Use this pre-inked industrial stamp on almost any surface! The proprietary ink formula is fast drying, permanent and water-resistant when fully cured. The average drying time for the "F-Series" stamps is around 90-120 seconds but may due to atmospheric conditions. Use Xstamper Industrial Refill Ink only.
Re-Inking Instructions: Remove the cap and place face down. Hold stamp handle firmly and pull out the die holder from the handle. Place the die holder on top of the removed cap with the impression die facing down. Hold the die firmly and remove the top plug. Add five drops of ink into the F11 opening. Re-ink your stamp overnight to allow the ink to fully absorb into the stamp pad.
Works on the following surfaces with results:
Excellent- A.B.S, Acrylic Board, Aluminum, Brass, Cellophane, Cotton Cloth, General Painted Surfaces, Polyester Film, Art Paper, Construction Paper, Corrugated Paper, Photographic Paper, Stainless Steel
Good- Ceramic, Glass, Hard & Soft P.V.C, Leather, Melamine Coated Board, Plywood, Coated Paper, Hard & Regular Tracing Paper, Letter Paper, Polypropylene, Styrofoam, Synthetic Fabric
Fair- Polyethylene Film, Rubber
- Fully customizable
- Xstamper (Oil Based) Ink
- Xstamper Lifetime Warranty
- Thousands of crisp impressions
- Easy to order
- Lead time is 7-10 business days